What is a good mobile phone holder should meet the following requirements:

1. Easy to install and use

The most convenient mounting bracket should be installed for up to 5 minutes and be used normally. In addition, to install and remove the phone from the bracket, it must be simple enough, convenient, and easy to use. Otherwise, every time you install / carry a mobile phone for half a day, you will be very broken.

2. Good stability

In the process of driving, regardless of fast start, emergency braking, fast rotation / speed changing line, fast passing through slow belt or bumpy road, the mobile phone holder and mobile phone on the bracket shall be firmly fixed, and shall not swing, shake or fall. Otherwise, it will not only affect the use, otherwise there may be potential safety hazards.

For example, the following slender bracket is easy to shake during operation.

3. Adjustable angle

By adjusting the rotation function, you can adjust the phone screen to the most appropriate angle of view, or you can place the phone vertically or in parallel.

Adjust the direction, to the driver's side, view more convenient.

4. Don't block the view

The bracket should not affect the driving field of vision, and driving will not cause additional blind spots.

If you can install the following, it's easy to view, rather than block the view, more convenient and safe.

5. High cost-effectiveness

To meet the above conditions, of course, is a very good product, but the price must be appropriate, the price is too high, and the cost performance ratio is greatly reduced.

6. Don't destroy the body

During the installation, use and removal of the bracket, the vehicle center console and various accessories will not be damaged.

The following price, money spent not enough to buy

So, what kind of mobile phone can meet these requirements? Here, let's take a look at the market and see the products.

Mobile phone bracket classification

1. Classification of fixed mobile phones

Similarly, the main way to fix the mobile phone on the bracket is clip type and strong magnetic type.

In the early stage, the mobile phone can be basically adjusted with the mobile phone clip, which is relatively stable, but the loading is severe and the blocking head is also large.

The strong magnetic adsorption support has the advantages of small volume, convenient installation and easy installation, which has been gradually popularized in the near future. Of course, this also has a disadvantage, that is, a small round thin iron must be installed on the mobile phone.

Which bracket is better?

2. Installation classification

Now the mobile phone bracket on the market, from the installation classification point of view, mainly suction cup, paste, out of the network and so on.

Sucking type installation is convenient, just pull the pull button on the clean glass. But it can only be installed on the smooth front windshield, blocking the line of sight. If the sun is exposed for a long time, there is a risk of falling.

The adhesive bracket can be very strong in the car, but it can not be installed after installation. It is more difficult to remove the bracket and the adhesive is not easy to completely remove.

The air outlet bracket is usually clamped at the air outlet of the air conditioner. It is easy to install and remove. Of course, it will block part of the outlet and may affect the direction of wind direction adjustment.

There are other installation methods, such as the anti-skid pad, which is simple to install, but is placed in the center of the console; there is a bracket installed on the CD, which is not firm and may damage the CD; there is a bracket installed on the steering wheel, which can not be bought, otherwise the balloon will be life-threatening!

In contrast, the last South brother chose the recommended export-oriented magnet mobile phone rack. The reasons for the selection are:

1. Small size, installed at the exit position, easy to observe, does not affect the field of vision;

2. Easy to install the bracket, solid, usually the mobile phone is also very convenient and solid;